| 武正东,谷圣刚,司乃潮,刘光磊,万浩,王宏健.不同蠕化率的蠕墨铸铁滚动磨损性能研究[J].材料导报,2016,30(14):113-116, 139 |
| 不同蠕化率的蠕墨铸铁滚动磨损性能研究 |
| Study on Rolling Wear Property of Vermicular Cast Iron with Different Vermicularity |
| |
| DOI：10.11896/j.issn.1005-023X.2016.14.025 |
| 中文关键词: 蠕墨铸铁 蠕化率 滚动磨损性能 疲劳磨损 |
| 英文关键词: vermicular cast iron, vermicularity, rolling wear property, fatigue wear |
| 基金项目: |
|
| 摘要点击次数: 1989 |
| 全文下载次数: 1319 |
| 中文摘要: |
| 采用M-2000型摩擦磨损试验机,对不同蠕化率的蠕墨铸铁、灰铸铁和球墨铸铁在相同条件下进行滚动磨损试验,对比分析了蠕墨铸铁表面磨损形貌及其滚动磨损机理。结果表明,随着蠕化率的提高,蠕墨铸铁中石墨尺寸减小、分布更加均匀化,其硬度和耐磨性能呈下降趋势。蠕墨铸铁滚动磨损机理以表面疲劳磨损和剥层损伤为主,磨损表面出现层状结构剥落后留下的凹坑。蠕铁中石墨虽然具有自润滑作用,但是因其本身硬度较低,在循环接触应力下破碎,成为表面疲劳的裂纹源,反而加剧了磨损。蠕墨铸铁滚动磨损性能接近球墨铸铁,而优于灰铸铁。 |
| 英文摘要: |
| The rolling friction property of vermicular cast iron with different vermicularity was tested on M-2000 type friction testing machine under the same conditions, compared with gray cast iron and ductile cast iron. Surface wear morphology and rolling wear mechanisms was analyzed. The results showed that with the increase of vermicularity, the distribution of vermicular graphite transformed homogeneous and refinement. Meanwhile, the hardness and wear resistance were on the decline. The surface fatigue wear and delamination damage were the main rolling wear mechanism of vermicular cast iron. Hollows appeared on the wear surface, since layer structure had split away from the surface. Although vermicular graphite had self-lubricating function, and it was broken under cyclic contact stress due to the low hardness, which formed the surface fatigue crack source. Close to ductile cast iron, rolling wear property of vermicular cast iron was better than that of gray cast iron. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
