文章摘要
高倩,白芳,丁红胜,童莉葛,高婷,白世武,余江峰.焊接熔池中元素分布规律及其影响因素的研究进展[J].材料导报,2017,31(11):80-85
焊接熔池中元素分布规律及其影响因素的研究进展
Influencing Factors of Element Distribution in Welding Pool:A Review
  
DOI:10.11896/j.issn.1005-023X.2017.011.011
中文关键词: 焊接 元素分布 熔池 流动 扩散
英文关键词: welding, element distribution, welding pool, flow, diffusion
基金项目:国家自然科学基金(51206010);国家重点研发计划项目(2016YFB0601101)
作者单位E-mail
高倩 北京科技大学数理学院,北京 100083  
白芳 北京科技大学数理学院,北京 100083  
丁红胜 北京科技大学数理学院,北京 100083  
童莉葛 北京科技大学能源与环境工程学院,北京 100083 50962918@qq.com 
高婷 北京科技大学能源与环境工程学院,北京 100083  
白世武 中国石油天然气管道科学研究院,廊坊 065000  
余江峰 中国人民解放军96819部队顾问专家中心,北京100015  
摘要点击次数: 2615
全文下载次数: 2423
中文摘要:
      焊接过程中焊接熔池内部的流体流动传热过程对熔池的形状、气体及夹杂物的吸收、聚集和逸出等影响很大,尤其影响元素在熔池中的分布。研究发现,熔池内流体主要受表面张力、浮力和电磁力的作用,其中表面张力对熔池形状起主导作用;焊接热输入、功率、焊接速度均对焊接熔池的形成有不同程度的影响。在焊接过程中,不同材料在交界处会发生元素互扩散,不同的元素扩散系数相差较大,而同种元素在不同扩散深度处的扩散系数却相差不大。由于焊缝中元素分布是否均匀直接关系到焊接接头的质量,因此元素在熔池熔化过程中具体的扩散形式以及在熔池凝固后元素的偏析情况是未来的研究热点。
英文摘要:
      The fluid flow and heat transfer in welding process has a great influence on the shape of welding pool, the absorption and accumulation of gas and inclusions, especially on the distribution of elements in the molten pool. Sufficient researches have showed that the fluid in the molten pool is mainly affected by surface tension, force and electromagnetic force, in which the effect of the surface tension is the key factor on the welding pool shape. The welding heat input and the welding speed also have different effects on the formation of the welding pool. The element interdiffusion phenomenon occurs at the interface between different materials. The diffusion coefficient is obviously distinct for diverse elements at different diffusion depth, but it is similar for the same elements. The uniform distribution of the elements has a significant influence on the quality of the welding joint. In the future, the research will focus on the specific diffusion form and the segregation of elements in the molten pool.
查看全文   查看/发表评论  下载PDF阅读器
关闭