文章摘要
周慧子,肖寒,曾文文,王瑞雪,程明,张士宏.不同温度加载模式AZ31镁合金型材张力绕弯成形数值模拟[J].材料导报,2017,31(18):131-135, 149
不同温度加载模式AZ31镁合金型材张力绕弯成形数值模拟
Numerical Simulation of the AZ31 Magnesium Alloy Profile Subjected to Warm Tension-Rotation Bending with Different Temperature Model
  
DOI:10.11896/j.issn.1005-023X.2017.018.026
中文关键词: 镁合金型材 张力绕弯 数值模拟 温度场
英文关键词: magnesium alloy profile, warming bending, numerical simulation, heating model
基金项目:国家自然科学基金(51305188);材料成形与模具技术国家重点实验室开放课题研究基金(P2015-12) 周慧子:1995年生,硕士研究生,主要研究方向为镁合金弯曲成形技术 E-mail:zhoubeipiao@126.com 肖寒:通讯作者, 1981年生,博士,副教授,主要研究方向为镁合金弯曲成形技术 E-mail:kmxh@kmust.edu.cn
作者单位E-mail
周慧子 昆明理工大学材料科学与工程学院,昆明 650093 zhoubeipiao@126.com 
肖寒 昆明理工大学材料科学与工程学院,昆明 650093  
曾文文 昆明理工大学材料科学与工程学院,昆明 650093  
王瑞雪 中国科学院金属研究所,沈阳 110016  
程明 中国科学院金属研究所,沈阳 110016  
张士宏 中国科学院金属研究所,沈阳 110016  
摘要点击次数: 2400
全文下载次数: 1212
中文摘要:
      采用三维弹塑性热力耦合有限元法实现了薄壁U形AZ31镁合金型材的温热张力绕弯成形的数值模拟,分析了4种温度加载模式下型材温热张力绕弯成形过程的温度场和应力场的变化。从模具预热、绕弯前温度场均匀化处理、随动热源的添加等方面实现了型材绕弯过程中温度场稳定性的提高。结果表明,绕弯前型材均匀化10 s为最佳时间,随动热源的添加及模具的预热均减小了绕弯过程中型材与外界的热交换。分析了不同温度加载模式下型材内外侧等效应力及温度场的变化。模拟结果可以对AZ31镁合金型材张力绕弯成形工艺的优化提供参考。
英文摘要:
      The warm stretching process of U-sharped AZ31 magnesium profile with thin wall was simulated by 3D thermo-mechanically coupled finite element model. Variation of temperature filed and stress filed were simulated in four different temperature model. The mould preheating, temperature filed homogenization and the follow-up heating improved efficiency of bending were simulated. Results showed that ten seconds preheating time was significant, heat exchange could be decreased by follow-up heating and temperature field homogenization. Stable temperature field is investigated to apply in warm tension rotation bending of AZ31 magnesium alloy profile in this paper.
查看全文   查看/发表评论  下载PDF阅读器
关闭