文章摘要
季韬,林晓溁,梁咏宁,陈宝春,杨政险.钢纤维对掺花岗岩石粉UHPC的增强增韧:磷酸锌改性和纤维形状的影响及机理[J].材料导报,2017,31(23):66-72
钢纤维对掺花岗岩石粉UHPC的增强增韧:磷酸锌改性和纤维形状的影响及机理
Strenghening and Toughening Granite-powder-contained UHPC by Steel Fibers: Influences of Zinc Phosphate Treatment and Fiber Shape,and Mechanisms
  
DOI:10.11896/j.issn.1005-023X.2017.023.008
中文关键词: 钢纤维形状 磷酸锌改性 花岗岩石粉 超高性能混凝土(UHPC) 拉拔性能
英文关键词: steel fiber shape, zinc phosphate treatment, granite powders, ultra high performance concrete (UHPC), pullout beha-vior
基金项目:国家自然科学基金重点项目(促进海峡两岸科技合作联合基金)(U1305245)
作者单位E-mail
季韬 福州大学土木工程学院,福州 350116  
林晓溁 福州大学土木工程学院,福州 350116  
梁咏宁 福州大学土木工程学院,福州 350116  
陈宝春 福州大学土木工程学院,福州 350116  
杨政险 福州大学土木工程学院,福州 350116 jt72@126.com 
摘要点击次数: 2335
全文下载次数: 608
中文摘要:
      采用自制的单根钢纤维拉拔试验装置等,通过拉拔试验和SEM-EDS等试验,开展钢纤维的磷酸锌(ZnPh)改性及其形状对在蒸压养护条件下的掺花岗岩石粉超高性能混凝土(UHPC)增强增韧影响机理的研究。所研究钢纤维形状包括:镀铜平直型S、镀铜单折线端钩型G1、镀铜双折线端钩型G2和镀铜波浪型L。研究表明,钢纤维的机械咬合力起主导作用,钢纤维平均粘结强度与拔出功大小顺序均为:G1>G2>L>S。ZnPh改性后,钢纤维表面变粗糙,这增强了钢纤维与UHPC基体间的化学粘结力和静摩擦力,从而提高了钢纤维在UHPC中的平均粘结强度和拔出功。在UHPC韧性的提高方面,采用ZnPh改性,对S钢纤维最明显,而对异型钢纤维(G1、G2和L)则不明显。
英文摘要:
      This paper investigates the effect of steel fiber’s zinc phosphate (ZnPh) treatment and shape on the strength and toughness of ultra high performance concrete (UHPC) containing granite powders under autoclaved curing. Steel fibers with four dfferent shapes were used:straight with copper plating (S), single-linear hooked-end with copper plating (G1), bi-linear hooked-end with copper plating (G2) and crimped with copper plating (L). The results obtained from customized single steel fiber pullout test and SEM-EDS observation indicated that the mechanical interlock is the dominating effect for the enhanced strength and toughness of UHPC containing granite powders. The average bonding strength and pullout energy are in the order of G1>G2>L>S. The ZnPh treatment modified the fiber geometry, resulting in enhanced surface roughness, which increased the chemical bonding and static friction between the steel fibers and the UHPC matrix, and consequently raised the pullout energy of steel fibers in UHPC. Compared to G1, G2 and L steel fiber, the ZnPh treatment exhibited the most obvious effect toward S steel fiber in terms of enhanced toughness of UHPC.
查看全文   查看/发表评论  下载PDF阅读器
关闭