文章摘要
朱学良,魏智强,白军善,赵文华,冯旺军,姜金龙.碳包覆氧化亚钴纳米颗粒的制备与性能研究[J].材料导报,2018,32(4):621-625
碳包覆氧化亚钴纳米颗粒的制备与性能研究
Preparation and Characterization of Carbon-encapsulated Cobalt (Ⅱ) Oxide Nanoparticles
  
DOI:10.11896/j.issn.1005-023X.2018.04.023
中文关键词: 碳包覆 氧化亚钴 粒度 比表面积 孔结构
英文关键词: carbon encapsulation, cobalt (Ⅱ) oxide, particle size, specific surface area, pore structure
基金项目:基金项目:国家自然科学基金(51261015);甘肃省自然科学基金(1308RJZA238)
作者单位E-mail
朱学良 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州 730050
兰州理工大学理学院,兰州 730050 
xueliangzac@126.com,zqwei7411@163.com 
魏智强 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州 730050
兰州理工大学理学院,兰州 730050 
xueliangzac@126.com,zqwei7411@163.com 
白军善 兰州理工大学理学院,兰州 730050  
赵文华 兰州理工大学理学院,兰州 730050  
冯旺军 兰州理工大学理学院,兰州 730050  
姜金龙 兰州理工大学理学院,兰州 730050  
摘要点击次数: 2308
全文下载次数: 1543
中文摘要:
      采用直流电弧放电等离子体技术成功制备了碳包覆氧化亚钴纳米颗粒,并对样品的形貌、晶体结构、粒度、比表面积和孔结构采用高分辨透射电子显微镜(HRTEM)、X射线衍射(XRD)、X射线能量色散光谱(XEDS)、拉曼散射光谱(Raman)和N2吸-脱附等测试手段进行了分析。HRTEM表明该方法制备的碳包覆氧化亚钴纳米颗粒具有典型的核壳结构,颗粒形貌主要为球形或椭球结构,粒度均匀,分散性良好,粒径分布在20~60 nm,平均粒径为40 nm,外壳碳层的厚度为5 nm。XRD证明样品的内核为面心立方结构的氧化亚钴纳米颗粒,外壳为碳层。XEDS图谱表明样品中主要存在Co、O和C元素的特征峰。Raman光谱说明样品中碳外包覆层的石墨化程度较低,发生了红移现象。样品的N2吸附-脱附等温曲线属Ⅳ型,BET比表面积为33 m2/g,BJH脱附累积总孔孔容和脱附平均孔径分别为0.078 cm3/g和11 nm。当量粒径为43 nm,与TEM和XRD测得的结果基本一致。
英文摘要:
      Carbon-encapsulated CoO core-shell structure nanoparticles were successfully prepared by DC arc discharge plasma technique. The product was characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray energy dispersive spectrometry (XEDS). Raman spectroscopy and low-temperature N2 adsorption/desorption were employed to determine the morphology, crystal structure, specific area, and pore structure of the nanoparticles. HRTEM indicated that the carbon-encapsulated CoO nanoparticles prepared by this method possess typical core shell structure. The particle morphology exhibits spherical or ellipsoidal structure with uniform particle size and good dispersion. The particle size distribution is in the range of 20—60 nm, the average particle size is 40 nm, and the thickness of the shell carbon layer is about 5 nm. XRD studies demonstrate that the core of the particles is CoO with face-centered cubic structure CoO, and the outer shell is disordered carbon layer. XEDS spectra confirmed the presence of Co, O and C elements in the sample. Raman spectrum showed the low degree of graphite in the sample and the occurrence of red shift phenomenon. The N2 adsorption and desorption isotherm belongs to type Ⅳ, the BET specific surface area is 33 m2/g, the BJH desorption cumulative pore volume and desorption average pore size are 0.078 cm3/g and 11 nm, respectively. The equivalent particle size is 43 nm, which is consistent with the results measured by TEM and XRD.
查看全文   查看/发表评论  下载PDF阅读器
关闭