文章摘要
袁战伟,李付国,王春伟,王瑜,郭亚杰,周亮.基于Murty准则的SiCp/Al复合材料热加工图研究[J].材料导报,2018,32(4):657-661
基于Murty准则的SiCp/Al复合材料热加工图研究
Study on Hot Processing Map of SiCp/Al Composite Based on Murty Criterion
  
DOI:10.11896/j.issn.1005-023X.2018.04.030
中文关键词: SiCp/Al复合材料 热加工图 Murty准则
英文关键词: SiCp/Al composite, hot processing map, Murty criterion
基金项目:基金项目:西北工业大学凝固技术国家重点实验室开放课题(SKLSP201646;SKLSP201645);中央高校基本科研业务费专项资金(2014G1311090;310831161023;310831163401)
作者单位E-mail
袁战伟 长安大学材料科学与工程学院,西安 710061 yuanzhw@chd.edu.cn 
李付国 西北工业大学材料科学与工程学院,西安 710072  
王春伟 长安大学材料科学与工程学院,西安 710061  
王瑜 长安大学材料科学与工程学院,西安 710061  
郭亚杰 长安大学材料科学与工程学院,西安 710061  
周亮 长安大学材料科学与工程学院,西安 710061  
摘要点击次数: 2095
全文下载次数: 1194
中文摘要:
      采用热模拟压缩试验对15%(体积分数)SiCp/Al复合材料在温度为623~773 K、应变速率为0.001~10 s-1的热变形行为进行了研究,基于Murty准则建立了该材料的热加工图,并在此基础上建立了SiCp/Al复合材料临界失稳应变分布图。结果表明,随变形温度升高,SiCp/Al复合材料中的强化机制逐渐减弱,软化机制逐渐增强。基于临界失稳应变图可以确定出适合SiCp/Al复合材料加工的两个区域,分别为变形温度700~773 K、应变速率0.001~0.01 s-1和变形温度740~773 K、应变速率0.02~0.14 s-1。
英文摘要:
      The hot deformation behavior of 15vol% SiCp/Al composite has been studied with thermal simulation compression test in the temperature range of 623—773 K and strain rate range of 0.001—10 s-1. Based on Murty criterion, the hot processing maps have been established, and a critical instability strain map has been drawn accordingly. It can be found that with the increased deformation temperature, the strengthening mechanism of SiCp/Al composite decreased and softening mechanism enhanced gradually. Based on the critical instability strain map, two suitable regions for SiCp/Al composite materials hot processing have been identified, namely in deformation temperature range of 700—773 K, strain rate range of 0.001—0.01 s-1, and deformation temperature range of 740—773 K and strain rate range of 0.02—0.14 s-1.
查看全文   查看/发表评论  下载PDF阅读器
关闭